Photo Gallery

Ballast for Philips Spectral Lamps

A recent eBay find, this is a ballast for the Philips series of spectral lamps, mounted in a metal project box. It's obviously not a commercial product, as there is no brand name, so I'm assuming it was put together by someone in a college lab or some such place where they used spectral lamps. It works well, although I think they used the wrong value of PFC capacitor, as the PFC when measured is way lower than it should be. Some experimentation with different values is called for..!
Keywords: Gear

Ballast for Philips Spectral Lamps


A recent eBay find, this is a ballast for the Philips series of spectral lamps, mounted in a metal project box. It's obviously not a commercial product, as there is no brand name, so I'm assuming it was put together by someone in a college lab or some such place where they used spectral lamps. It works well, although I think they used the wrong value of PFC capacitor, as the PFC when measured is way lower than it should be. Some experimentation with different values is called for..!

DSC03340.JPG Osram-GEC_400W_MA-H.jpg Spectral_Lamp_Ballast.jpg GEC_280W_Dual_Arc_Tube_SOI-H_Lamp_Lit.jpg GEC_60W_SLI-H.jpg
Lamp/Fixture Information
Manufacturer:Unknown
File information
Filename:Spectral_Lamp_Ballast.jpg
Album name:Ria / Control Gear
Keywords:Gear
Filesize:205 KiB
Date added:20 Jul 2024
Dimensions:2119 x 1056 pixels
Displayed:47 times
Software:Shotwell 0.32.7
URL:https://trad-lighting.net/gallery/displayimage.php?pid=76
Favourites:Add to Favourites

Comment 1 to 4 of 4
Page: 1

Sammi   [Sat 20 Jul 2024 at 20:45]
Wonderful to have the correct gear to run our spectral lampses on. Cool
Ria   [Sun 21 Jul 2024 at 12:05]
It's virtually the same as a 90W SOX leak transformer ballast, but labelled for use with spectral lamps. A 90W SOX lamp runs perfectly on it..!
Sammi   [Sun 21 Jul 2024 at 23:51]
Tomorrow we'll build a board so that we can have four lamps on at once.
Ria   [Fri 03 Apr 2026 at 18:36]
The mains switch for this has decided to play up, it won't latch on, so we're going to have to look for a suitable replacement. It's a weird design I haven't seen before, so I doubt we'll be able to find an exact duplicate, but we should be able to find something that will fit.

Comment 1 to 4 of 4
Page: 1